Interstate-Guide Home State by State Interstate list Main Interstate Routes Hidden Interstates Decommissioned Interstates Future Interstates Business Loops & Spurs Interstates Facts & Trivia FHWA Route Log Kurumi's 3di Log

Interstate Business Route 76

Interstate 76 has two business loops on its western (Colorado) section, and one connecting spur route in New Jersey (I-76C). The connector is not a business spur by definition and instead is an internal designation used by NJDOT.

Location/
Status
Description
COLORADO
Keenesburg
Active (Unsigned)
An unsigned, state-maintained Business Spur for I-76 begins at Exit 39 and follows Market Street north to County Road 18 and south to Old Highway 6 (I-76 Frontage Road) within the town of Keenesburg. Inventoried by CDOT as Route 076B, the spur totals just 0.472 miles.
Fort Morgan, Brush, and Sterling
Active
This is the longest continuously signed Interstate business loop in the system. It follows U.S. 34 from Interstate 76 (Exit 75) through Fort Morgan and Brush east to Spur U.S. 34. Business Loop I-76 turns north on Spur U.S. 34, returning to Interstate 76 at Exit 92. Turning northeast, Business Loop I-76 follows U.S. 6 from Exit 92 through Hillrose, Merino and Atwood into the Sterling city limits. Once in Sterling, the business route is signed as U.S. 6 primarily and with trailblazers "To Interstate 76." The business route rejoins Interstate 76 at Exit 125.
Prior to 2007, this business loop had 57 miles worth of continuous signage, including many new signs installed in 2003. After 2007, the majority of business loop signs were removed from within the city limits of Sterling but left intact in the other cities and towns through which it travels. Business Loop I-76 was signed concurrently with U.S. 34 from Fort Morgan to Brush and with U.S. 6 from Exit 92 northeast to Sterling. Over the years, signage has varied somewhat based on individual sign replacement projects. While some business route markers were removed in the 2000s, for instance, they reappeared in 2010 along U.S. 34 (Brush Spur Connection) south from Exit 92 to U.S. 34 west to the city of Brush.1
Due to the fact that Business Loop I-76 overlaps portions of U.S. 34, Spur U.S. 34, and U.S. 6, the route is not inventoried in the CDOT Straight Line Diagram Tool.
Visit the Colorado Business Loop I-76 page for more information.
NEW JERSEY
Camden
Active (Unsigned)
I-76 Connector constitutes a 1.22-mile2 freeway spur linking Interstates 76 & 676 at the Walt Whitman Bridge with U.S. 130 (Crescent Boulevard) and New Jersey 168 (Black Horse Pike) in Camden. There are no I-76C shields along this route, just signs directing travelers to Interstates 76-676, the Walt Whitman Bridge and Philadelphia.

Interstate Business Route 376

When the business loop for I-376 was designated, it joined Business Loop I-83 as the second such route posted in the Commonwealth of Pennsylvania.

Location/
Status
Description
PENNSYLVANIA
Moon Township and Findlay Township
Active
Business Loop I-376 is a 6.88-mile long expressway along Airport Parkway through Moon and Findlay Townships. The business route skirts the eastern edge of Pittsburgh International Airport (PIT) as it winds northwest from Exit 57 to Exits 50-51.
The designation replaced Pennsylvania 60 Business on November 6, 2009, to coincide with the extension of Interstate 376 north to Beaver Falls. Signs for Interstate 376 along sections of former I-279 (Penn Lincoln Parkway West), U.S. 22 & 30, and Pennsylvania 60 started appearing as early as June 10, 2009. The final section of Interstate 376 to be signed was along the north-south PA Turnpike segment (James E. Ross Highway) by August 1, 2010.
  1. "Was the really long I-76 Colorado business loop retired?" online posting by corco, AARoads Forum, July 22, 2009.
  2. NJDOT Straight Line Diagrams.

Page Updated September 15, 2016.

U.S. 6 and former Business Loop I-76 east at Delmar Street in the Logan County seat of Sterling. The business route marker was removed from this assembly by 2007. Photo taken 08/29/04.